SEAMLESS MORPHING BETWEEN TWO AMP/FX PATHS

Post Reply
User avatar
hurghanico
Posts: 123
Joined: Fri Apr 06, 2018 11:23 pm

SEAMLESS MORPHING BETWEEN TWO AMP/FX PATHS

Post by hurghanico »

trick by L6 product manager

1. Create a patch with two parallel paths. One might have a clean model with a delay and the other a high gain model with a fuzz.

2. On the mixer block, make sure PAN A and PAN B are both set to 0%.

3. Place the Pan model right at the beginning split point of the two parallel paths.

4. Highlight the Pan model block and double-press MOVE. Assign:
  1. PARAMETER to Pan
  2. CONTROLLER to Exp 1
  3. MIN VALUE to 0%
  4. MAX VALUE to 100%
5. Press VIEW to return to the main page.

The expression pedal should now morph between two completely different sounds, all within the same patch.
Post Reply