1. On the System MIDI page, make sure MIDI OUT/THRU is set to OUT (NOT THRU!).
2. Using a standard MIDI cable, connect the MIDI OUT of the HD500 back to its MIDI IN.
3. Choose a patch from which you want to switch setlists.
4. Hold MOVE for two seconds to access the MIDI Assign page.
5. Cursor to FS1 and assign:
- MIDI CH to Base
- MESSAGE to Bank Change
- BANK # to the value of the desired Setlist (Setlist 1 is 000, Setlist 2 is 001, Setlist 3 is 002, etc.)
7. Press FS1.
HD500 instantly jumps to the setlist selected in step 5.
Now your feet can access 512 presets (instead of 64).